B0005
Driver Frontal Airbag Deployment Loop Resistance Too Low
Criticalelectrical
Overview
The B0005 code indicates that the body control module has detected a driver frontal airbag deployment loop resistance too low condition. This relates to the vehicle's body electrical systems, which control comfort, convenience, and safety features. When this code is stored, the affected system or component may not operate correctly, potentially impacting safety or comfort features.
Symptoms
- Turn signals flashing rapidly or not at all
- SRS indicator light stays on or flashes
- Airbag warning light illuminated on dashboard
- Door locks not responding to remote or switch
Common Causes
- Faulty body control module (BCM)
- Corroded battery terminals
- Corroded or damaged wiring harness connectors
- Blown fuse or faulty relay
Diagnosis Steps
- 1Connect an OBD-II scanner and read all stored body control module trouble codes
- 2Inspect the affected circuit fuse and relay; replace if blown or faulty
- 3Check the wiring harness and connectors for damage, corrosion, or loose pins
- 4Test circuit voltage and ground with a multimeter at the affected component
- 5Verify battery voltage is within specification (12.4V+ engine off)
Estimated Repair Cost
$75 — $800
Cost varies by vehicle, location, and repair shop. Includes parts and labor.
Commonly Affected Vehicles
Mercedes-Benz C-ClassToyota CamrySubaru OutbackKia Forte
Related Codes
More Electrical Codes
B0001Driver Frontal Airbag Deployment Loop Circuit Open
CriticalB0002Driver Frontal Airbag Deployment Loop Circuit Short to Ground
CriticalB0003Driver Frontal Airbag Deployment Loop Circuit Short to Battery
CriticalB0004Driver Frontal Airbag Deployment Loop Resistance Too High
CriticalB0006Passenger Frontal Airbag Deployment Loop Circuit Open
CriticalB0007Passenger Frontal Airbag Deployment Loop Circuit Short to Ground
CriticalFrequently Asked Questions
Driving with the airbag warning light on means the SRS system may not deploy in a crash, which significantly increases injury risk. Have the system inspected as soon as possible.