P0443
Evaporative Emission Control System Purge Control Valve Circuit
Moderateevaporative
Overview
The P0443 code indicates the PCM has detected a evaporative emission control system purge control valve circuit condition in the evaporative emission control (EVAP) system. The EVAP system prevents fuel vapors from escaping into the atmosphere by routing them to the engine for combustion. A fault in this system can result in harmful fuel vapor emissions and a failed emissions test.
Symptoms
- Check Engine Light (MIL) illuminated
- Gas cap warning light
- Hissing sound from fuel tank area
- Fuel odor near the vehicle
Common Causes
- Loose, damaged, or missing gas cap
- Leaking EVAP hose or tube
- Faulty purge control valve/solenoid
- Wiring issues in EVAP circuit
Diagnosis Steps
- 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
- 2Inspect and tighten the gas cap; replace if damaged or worn
- 3Perform a smoke test on the EVAP system to locate leaks
- 4Inspect all EVAP hoses and connections for cracks or disconnections
- 5Test the purge valve and vent valve with a multimeter and vacuum pump
Estimated Repair Cost
$50 — $600
Cost varies by vehicle, location, and repair shop. Includes parts and labor.
Commonly Affected Vehicles
Mazda CX-5Subaru OutbackHyundai SonataKia Soul
Related Codes
More Evaporative Codes
P0440Evaporative Emission Control System Malfunction
ModerateP0441Evaporative Emission Control System Incorrect Purge Flow
ModerateP0442Evaporative Emission Control System Leak Detected (Small Leak)
LowP0444Evaporative Emission Control System Purge Control Valve Circuit Open
ModerateP0445Evaporative Emission Control System Purge Control Valve Circuit Shorted
ModerateP0446Evaporative Emission Control System Vent Control Circuit
ModerateFrequently Asked Questions
Yes, a loose, damaged, or missing gas cap is one of the most common causes of EVAP system codes. Always try tightening the gas cap first and driving for a few days to see if the code clears.