OBD Codes

B0011

Driver Side Airbag Deployment Loop Circuit Open

Criticalelectrical

Overview

The B0011 code indicates that the body control module has detected a driver side airbag deployment loop circuit open condition. This relates to the vehicle's body electrical systems, which control comfort, convenience, and safety features. When this code is stored, the affected system or component may not operate correctly, potentially impacting safety or comfort features.

Symptoms

  • Climate control not responding to inputs
  • Windshield wipers not operating or stuck
  • Turn signals flashing rapidly or not at all
  • Headlights or taillights not functioning

Common Causes

  • Failed window/lock/seat motor
  • Corroded or damaged wiring harness connectors
  • Failed HVAC actuator motor
  • Faulty body control module (BCM)

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored body control module trouble codes
  2. 2Inspect the affected circuit fuse and relay; replace if blown or faulty
  3. 3Check the wiring harness and connectors for damage, corrosion, or loose pins
  4. 4Test circuit voltage and ground with a multimeter at the affected component
  5. 5Verify battery voltage is within specification (12.4V+ engine off)

Estimated Repair Cost

$75$800

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Mercedes-Benz C-ClassFord F-150Nissan AltimaHonda Accord

Related Codes

More Electrical Codes

Frequently Asked Questions

Driving with the airbag warning light on means the SRS system may not deploy in a crash, which significantly increases injury risk. Have the system inspected as soon as possible.