B0056
Headlamp Left High Beam Circuit Malfunction
Moderateelectrical
Overview
The B0056 code indicates that the body control module has detected a headlamp left high beam circuit malfunction condition. This relates to the vehicle's body electrical systems, which control comfort, convenience, and safety features. When this code is stored, the affected system or component may not operate correctly, potentially impacting safety or comfort features.
Symptoms
- Audio system not powering on
- Door locks not responding to remote or switch
- Airbag warning light illuminated on dashboard
- HVAC blower not blowing air
Common Causes
- Faulty body control module (BCM)
- Faulty SRS/airbag control module
- Low battery voltage or failing alternator
- Poor ground connection
Diagnosis Steps
- 1Connect an OBD-II scanner and read all stored body control module trouble codes
- 2Inspect the affected circuit fuse and relay; replace if blown or faulty
- 3Check the wiring harness and connectors for damage, corrosion, or loose pins
- 4Test circuit voltage and ground with a multimeter at the affected component
- 5Verify battery voltage is within specification (12.4V+ engine off)
Estimated Repair Cost
$75 — $800
Cost varies by vehicle, location, and repair shop. Includes parts and labor.
Commonly Affected Vehicles
Hyundai SonataGMC SierraHonda AccordMazda CX-5
Related Codes
More Electrical Codes
B0001Driver Frontal Airbag Deployment Loop Circuit Open
CriticalB0002Driver Frontal Airbag Deployment Loop Circuit Short to Ground
CriticalB0003Driver Frontal Airbag Deployment Loop Circuit Short to Battery
CriticalB0004Driver Frontal Airbag Deployment Loop Resistance Too High
CriticalB0005Driver Frontal Airbag Deployment Loop Resistance Too Low
CriticalB0006Passenger Frontal Airbag Deployment Loop Circuit Open
CriticalFrequently Asked Questions
Driving with the airbag warning light on means the SRS system may not deploy in a crash, which significantly increases injury risk. Have the system inspected as soon as possible.