OBD Codes

P0468

Purge Flow Sensor Circuit High Input

Moderateevaporative

Overview

The P0468 code indicates the PCM has detected a purge flow sensor circuit high input condition in the evaporative emission control (EVAP) system. The EVAP system prevents fuel vapors from escaping into the atmosphere by routing them to the engine for combustion. A fault in this system can result in harmful fuel vapor emissions and a failed emissions test.

Symptoms

  • Check Engine Light (MIL) illuminated
  • Fuel odor near the vehicle
  • Failed emissions test
  • Slight decrease in fuel economy

Common Causes

  • Loose, damaged, or missing gas cap
  • Damaged charcoal canister
  • Leaking EVAP hose or tube
  • Faulty purge control valve/solenoid

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Inspect and tighten the gas cap; replace if damaged or worn
  3. 3Perform a smoke test on the EVAP system to locate leaks
  4. 4Inspect all EVAP hoses and connections for cracks or disconnections
  5. 5Test the purge valve and vent valve with a multimeter and vacuum pump

Estimated Repair Cost

$50$600

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Nissan AltimaMazda CX-5Kia SoulChevrolet Silverado

Related Codes

More Evaporative Codes

Frequently Asked Questions

Yes, a loose, damaged, or missing gas cap is one of the most common causes of EVAP system codes. Always try tightening the gas cap first and driving for a few days to see if the code clears.